4.16 Light Sensor Board and Audio Board

4 Replacement Procedures

Installing the Power Board, Switch Board and Logo LED Board

Install the Light Sensor Board and Audio Board according to the following procedures and Figure 4-27.

1.Seat the light sensor board in the correct position and secure it with the one M2x3 black flat head screw.

2.Connect the audio board flat cable to CN9803 on the audio board.

3.Seat the audio board in the correct position and secure it with the two M2x3 black flat head screw.

Satellite/E200/E205 Maintenance Manual

4-45

Page 187
Image 187
Toshiba E205 manual Light Sensor Board and Audio Board Replacement Procedures