4.21 LED Board and Card Reader Board | 4 Replacement Procedures |
4.21LED Board and Card Reader Board
Removing the LED Board and Card Reader Board
Remove the LED Board and Card Reader Board according to the following procedures and Figure
1.Remove two M2x3 black flat head screws and remove the LED lens.
2.Remove one M2x3 black flat head screw and remove the LED board.
3.Disconnect the LED board cable from CN9500 on the LED board.
4.Remove two M2x3 black flat head screws and remove the card reader board.
5.Disconnect the card reader board cable from CN9903 on the card reader board.
LED lens M2x3 black flat head screw | LED board cable |
| |
CN9500 | CN9903 |
|
LED board
Card reader board | Card reader board cable |
| |
M2x3 black flat head screw |
|
Figure 4-33 Removing LED Board and card reader board
Satellite/E200/E205 Maintenance Manual |
