4.19 LCD Module

4.20 CCD Board and MIC

4.20CCD Board and MIC

Removing the CCD Board and MIC

Remove the FL inverter board according to the following procedures and Figure 4-32.

1.Remove the CCD module with CCD cable from display rear cover.

2.Disconnect the CCD cable from the CCD module connector.

CCD module

MIC cable

CCD cable

 

Display rear cover

Figure 4-32 Removing the CCD board and MIC

3. Lift the MIC from the display rear cover.

Satellite/E200/E205 Maintenance Manual

4-53

Page 195
Image 195
Toshiba E205 manual LCD Module CCD Board and MIC, Removing the CCD Board and MIC