Toshiba E205 manual Display Assembly Replacement Procedures, Removing the Display Assembly

4.5 Display Assembly 4 Replacement Procedures

4.5Display Assembly

Removing the Display Assembly

Remove the display assembly according to the following procedures and Figures 4-7.

1.Open the display panel at an angle of 90 degrees.

2.Turn the computer upside down.

3.Disconnect the CCD cable from CN2250 on the system board.

4.Disconnect the MIC cable from CN208 on the system board.

5.Disconnect the LCD cable from CN3000 on the system board.

6.Remove two M2.5x4 black flat head screws securing the LCD module to the top cover.

CN208

CN2250

CCD cable CN3000

MIC cable

M2. 5x4 black flat head screw

LCD cable

Figure 4-7 Removing the display assembly

Satellite/E200/E205 Maintenance Manual 4-17