To Light

D Brightness may be

adjusted with

WARNING

fuel valve. (Fig. 23)

 

If you smell gas:

 

1. Do not attempt to light appliance.

 

2. Extinguish any open flame.

Fig. 23

3. Disconnect from fuel supply.

 

4. Call 1-800-835-3278.

 

WARNING

D The lantern may be

carried by the

• Replace any mantle with a hole in it. A hole

handle. (Fig. 24)

 

can cause lantern to overheat and create a

 

hazard. Never operate lantern without

 

heat shield.

 

CAUTION

 

• SERVICE SAFETY

 

• Keep all connections and fittings clean.

 

Inspect propane cylinder and lantern propane

Fig. 24

connections for damage before attaching.

 

During set up, check all connections and fittings for leaks using soapy water. Bubbles

indicate a leak. Never use a flame.

To Turn Off

 

Battery

D Turn fuel valve

INSTASTART™

off. (Fig. 25)

Electronic

 

Ignition Lantern

 

D Push ignitor button

 

and hold; then turn

 

fuel valve on. (Fig. 21)

Fig. 25

 

 

To Store

 

Fig. 21

WARNING

D Make sure lantern is cool.

D Move lantern away from flame (including pilot

 

 

lights) and other ignition sources.

 

D Fold feet on lower carry case. (Fig. 26)

• BURN HAZARD

 

• Never leave lantern unattended when hot or

 

in use.

 

• Keep out of reach of children.

 

NOTE: If lantern does not light, repeat above step

 

after turning fuel valve completely off. If the

 

lantern is wet due to rain, high humidity, etc., the

 

ignitor may not spark. Use match lighting

Fig. 26

procedure as follows.

 

Match Light

D Unlock the lower carry case and remove from

Lantern

the upper carry case. (Fig. 27)

D Push lighted match

 

through lighting hole,

 

hold near mantle and

 

open fuel valve fully.

 

(Fig. 22)

 

Fig. 22

Fig. 27

English-5

Page 6
Image 6
Coleman 2600 Series manual To Light, To Turn Off, To Store, English-5