Coleman 5600 manual Flange on Right Side Panel Firebox

Step

8

ÖFasten the Firebox to the

Grill Cart.

NOTE: In Fig. 8-A and 8-B, the

Cart Spacer is not illustrated.

Hardware shown actual size

(TN)	(DY)
M6 x 15mm Screw	M6 Flat Washer
(4) Qty.	(4) Qty.

8-A	Firebox
TN (x2)
DY (x2)
Flange on Right	Flange on
Side Panel	Firebox

8-A. Lower the Firebox until it is supported by the flanges on the Right and Left Side Panels.

ÖLOOSELY fasten the Firebox to the Right Side Panel with two Flat Washers (DY) and two Screws (TN) as shown in Fig. 8-A.

ÖNOTE: You will tighten these screws LATER (during Step 8-B), after the left side of the Firebox is attached to the Grill Cart (this helps with alignment).

8-B. Fasten the left side of the Firebox to the
	8-B
Grill Cart with two Flat Washers (DY)
and two Screws (TN).
Ö Tighten all fasteners.

TN (x2)

DY (x2)

View of Grill from Rear

13