Natural Gas Conversion Instructions
Tools Needed:
Phillips head screwdriver 1/4" nut driver *
9/16" wrench Adjustable wrench
Fig 1
Heat Tents
* 1/4” socket set with extension can also be used.
Rear Heat Shield
Be sure gas supply is off, the knobs are in the off position and the grill is cool.
1.Remove cooking grates and heat tents (Fig. 1).
2.Remove the screws holding the rear heat shield in place. Lift out rear heat shield and set aside (Fig. 2).
3.Remove the two screws holding each electrode in place (Fig. 3).
4. Lay igniters on floor of grill (Fig. 4).
Fig 2
Screws
Fig 3
Screws
Fig 4
3
