Natural Gas Conversion Instructions
5.Remove the screws from the bottom of the heat shield, holding the front heat shield in place. The screws are located under the bottom lip of the shield (Fig. 5).
6.Remove the two side heat shield screws
located under the bottom lip of the heat shield. There is one screw on each side (Fig. 6).
7.Remove the front heat shield (Fig. 7).
8.Grasp and push the burner(s) towards the rear of the grill to detach the burner from the valves (Fig. 8).
9.Angle the burners up and remove (Fig. 8).
Fig 5
Screws
under lip
Side Screws
(Repeat on left side).
Fig 6
Fig 7
Tabs
Fig 8
4
