Assembly/Set up (cont.)
STEP 6 INSTALLING IGNITION BOX
■Install the Ignition Box to the left front leg (on the inside surface) with two
2 Required
STEP 7 RIGHT SIDE TABLE
■Remove preinstalled screws from Right Supports.
■Install Right Side Table.
NOTE: Side Table Supports have slots for easy assembly.
■Tighten securely.
Front
of unit
STEP 8 LEFT SIDE BURNER
■Remove preinstalled screws from Left Supports.
■Install Left Side Burner Table.
NOTE: Side Table Supports have slots for easy assembly.
■Tighten securely.
Front
of unit
■Remove hairpin cotter from the post
on the underside of the burner. | BURNER |
■ Install the Side Burner with the | VENTURI |
Burner Venturi pointing toward the |
|
Valve Control Knob location. |
|
STEP 8 LEFT SIDE BURNER (cont.)
■Insert the post through the mounting hole.
■Reinstall the hairpin cotter.
POST
STEP 9 BURNER ASSEMBLY
■Remove plastic wrap from the HVR (Hose, Valve, Regulator) before lifting the grill assembly and placing onto the frame.
■Remove eight sets of hardware, shown below, from the hardware package.
NUT |
WASHER |
SPACER |
BOLT |
8 Required |
■Install eight (8) spacers by aligning
keyed protrusions into the grill side and lock in place with 1/2 turn.
■Install Grill Assembly as shown. (Two people required.)
Front of Unit
■Both sections of Hose & Tee must pass through hole in Panel.
■Eight (8) Bolts, Washers and Nuts are required. Install Bolts through Frame, Spacer and side of the grill. Place Washer and Nut on Bolt and tighten. Install at each corner.
Bolt
Washer
Nut | 9 |
|