Assemble Grill
IMPORTANT: Remove all packing material prior to assembly/use.
Assemble Wheels and Towing Handle
■Remove grill, wheels, legs and handle from packaging.
■Inspect all packing and remove all parts.
■See carton for parts included with your unit.
■Assemble wheels to grill base. Attach each wheel to axle using one bolt and one
washer. (Fig. 3, Fig. 4)
Fig. 3
NOTE: Wrench not provided.
Fig. 4
■ Telescope the extending tubes to the towing handle. Press buttons on towing handle and push in until they lock into place. (Fig. 5)
Fig. 5
■Cap the ends of the
extending tubes with provided bushings. (Fig. 6)
Fig. 6
■ Interlock the towing handle and the grill stand with pivot bolts, spacers and nuts. (Fig. 7)
Fig. 7
■Attach ends of towing handle to grill with pivot bolts & nuts. (Fig. 8)
■Once handle is locked in position, the grill can easily be moved to any location in your campsite or backyard. (Fig. 9)
Set up the Grill
■Place foot on towing handle, grasp lid handle and lift until stand is fully extended. (Fig. 10)
■Continue to pull lid handle toward you until stand is fully extended. (Fig. 11)
■Lower grill and slide grill back until leg extensions lock into brackets on bottom of grill stand. (Fig. 12, Fig. 13, Fig. 14)
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
English - 4
