Fryer Burner
Lighting (cont.)
12. Adjust flame with the control knob (Fig. 19).
Fig. 19
8. Adjust flame with the control knob (Fig. 21).
Fig. 21
■A good flame should be blue with minimal yellow tip. Some yellow tips on flames are acceptable as long as no carbon or soot deposits appear (Fig. 22).
Match Lighting:
CAUTION
Use a LONG wooden match or a butane lighter with an extension. Make sure all burner controls are off except for the burner being lighted. If a
GOODBAD
Yellow
Yellow Blue
Holes in Burner
Blue
Fig. 22
Fryer Grease Pan will make it easier to access the Fryer Burner. Be sure to replace the Fryer Grease Pan as soon as the burner stays lit.
1.Open the lid.
2.Make sure all valves are OFF.
3.Turn on the cylinder valve.
4.Strike and place the burning match near the burner gas port holes, from below the fryer.
5.Push in and turn on the Fryer Control Knob counterclockwise to HIGH (Fig. 20).
6.Continue to depress and hold the Fryer Control Knob.
7.After burner ignition, continue to hold Fryer Control Knob in for
Fig. 20
NOTE: If the burner flame is accidentally extinguished, turn off the control knob and wait 5 minutes before relighting the appliance.
To Turn Off
Turn off the control knob (Fig. 23).
Fig. 23