Fryer Assembly (cont.)
6.Push the fuel hose connection through the opening in the side grill panel (Fig. 7).
Fig. 7
7.Open the door to reveal the Quick Coupler in the upper corner. Retract the Collar on the Quick Coupler before attaching to the male fitting (Fig. 8). Release the collar to lock the connection.
Fig. 8
8.Check that the hose has no kinks or sharp bends and clears areas that will become hot during use. Never put strain on the hose where it joins a fitting.
Setup
1.Slide the grease tray into the rails below the fryer (Fig. 9).
Fig. 9
2.Place the oil reservoir in the Side Fryer. Locate the thermometer bracket on the right side (Fig. 10).
Thermometer Bracket |
Fig. 10 |
3.Fill the oil reservoir with 2.67 qts (2.53 liters) maximum of cooking oil, indicated by the marks on the oil reservoir (Fig. 11).
Max Fill Line
Fig. 11
DANGER
DO NOT FILL PAST MAXIMUM FILL LINE MARKED ON THE OIL RESERVOIR or an oil overflow may occur resulting in a fire which could cause property damage, personal injury or death.
4. Place the thermometer in the holder (Fig. 12).
Fig. 12
