37
Section 11 - Operation and Adjustment
Harness Use and Adjustment
Harness Strap Adjustment:
•To tighten: Pull front adjuster strap (fig. a).
•To loosen: Insert finger under adjuster cover on pad, press harness adjuster lever, and pull harness straps out.
•If the harness cannot be adjusted to properly fit child, (see “Changing Harness Length And Use Position” section).
Chest Clip Operation:
Harness
Adjuster 
Strap
(fig. a)
Harness
Adjuster
Lever
(Under
Adjuster
Cover)
1
•To open: Press tabs 1 and pull apart 2 (fig. b).
•To close: Snap halves together. Make sure chest clip is locked by pulling out.
Shoulder Strap Covers: Either “Folding” or “Tube” style covers are provided
Folding Style Covers:
Open folded shoulder strap cover, place over shoulder belt above chest clip with folded side toward child, and close shoulder belt cover (fig c.)
Tube Style Covers:
Unhook harness and pull out through seat back, see “Changing Shoulder Harness Slot Position” section. Slide shoulder belt up through strap cover, rethread harness straps through seat back, and
2 2
1
(fig. b)
(fig. c)
Changing Use Position and Harness Length
WARNING
•Shoulder belts MUST be through belt slots in infant insert.
•Shoulder harness MUST snugly adjust around infant.
•Shoulder harness straps MUST be through slots at or just below shoulders.
Each shoulder harness strap has two harness adjustment loops, 1 and 2 , to adjust harness fit as the infant grows. 38
| 1 |
Shoulder | 2 |
Harness |
|
Loops | (fig. a) |
|
