Combi 8045 instruction manual Base Adjustment, Recline Adjustment Handle

41

Carry Handle Operation - Carry handle has four positions (fig. c):

A.Vehicle use position and carrying position

B.Rocking position

C.Rocking position

D.Reclined seat position

Each handle position can be used for vehicle positions depending on size of vehicle.

A

B

C

D

1

2

1

To change carrying handle position:

(fig. c)

(fig. d)

Handle

•Push in handle adjustment buttons on each side of handle 1 (fig. d).

•Rotate handle forward or backward 2 until it locks into a use position. IMPORTANT: Check to be sure carry handle is locked before lifting car seat.

Adjustment

Button

NOTE: Handle does not lock between position C and position B. Handle will move from position C into position B without pushing in handle adjustment buttons.

Base Adjustment:

WARNING DEATH or SERIOUS INJURY can occur

•Rear-facing car seat MUST be properly reclined:

-Too reclined can result in injury or death from ejection.

-Too upright can result in breathing difficulties.

The base has a three position adjustable recline foot to assist in properly reclining the car seat.

Use recline indicator to verify proper car seat recline position.

To Adjust:

-Pull out on recline adjustment handle and lower or raise recline foot to desired position (fig. a).

-Release recline adjustment handle to lock recline foot in position.

42

Recline
Adjustment	1
Handle	2
	3
	(fig. a)