29
6
7
Position vehicle lap belt on vehicle seat.
a.Extend vehicle lap belt all the out the way out and buckle vehicle belt.
b.Place center section of lap belt flat on vehicle seat as shown in fig. c. Check that vehicle lap belt is not twisted and lays flat across seat.
Route vehicle lap belt through base.
a.Center base on the center section of lap belt.
b.On side of base lift lap belt up and hook over blue belt guide 1 , placing lap belt into belt slot on blue belt guide 2 (fig. d). Check that lap belt is not twisted.
c.Repeat step b for opposite side of base.
Center Section
Of Lap Belt
(fig. c)
| 2 |
NOTE: When installing with a lap and shoulder belt, route |
|
only the lap belt through the base, DO NOT route | 1 |
the shoulder belt through base. | (fig. d) |
8 Tighten vehicle belt to secure the base. Press down in center of base to depress the vehicle cushion while tightening vehicle belt (fig. e & f).
- When using a vehicle lap and shoulder belt, after tightening lap portion of the belt, place shoulder belt into slot in corner of base and allow shoulder belt to rest against vehicle seat back (fig. g).
9 Check for secure installation. Pull base front to back and | (fig. e) | Lap Belt |
left to right to check for secure installation (fig. h). Vehicle |
|
|
lap belt MUST stay tight. |
|
|
10 If the vehicle lap belt does not stay tight or base cannot be securely installed, see vehicle owner’s manual, “Vehicle Seat Belts” section or move to a different seating location.
11 Attach car seat to base. Lift car seat to ensure it is properly attached to the base (see “Attachment Of Car Seat To Base” section).
12 Recheck recline of car seat. Adjust if necessary | (fig. g) |
(see step 4). | 30 |
|
(fig. f) | Lap and |
| Shoulder Belt |
