Compaq 380 manual Configurations, Features

SECTION 1. FEATURES AND SPECIFICATIONS

The IntelliStripe® 380, Desktop Motorized Reader-Encoder reads and encodes magnetic-stripe cards and smartcards.

CONFIGURATIONS

Part numbers and descriptions for the basic configuration are as follows:

16050408 IntelliStripe 380

16050410 IntelliStripe 380, Magstripe Only

16051417 I/O Cable, 10-pin RJ45 connector connects to host 9-pin connector with 12V/Ground connector for Power Supply.

16051422 USB Cable, 5-pin mini B plug, connects to host 4-pin USB Type A Plug with the 10-pin RJ45 and 12V/Ground connector for Power Supply.

64300091 Power Supply 12 VDC, 4 A output, 100 –240 VAC auto ranging input.

71100001 AC power cord, P/N is for use in North America. Other users must supply their own cord, or contact MagTek for international cords.

FEATURES

The IntelliStripe 380 provides the following key features:

•3-Track magstripe read and encode with support for HiCo and LoCo cards. Also supports Drivers License and Custom format encode scheme.

•EMV T=0, T=1 Smartcard Interface. Also supports popular memory cards.

•Optional support for 6-socket SAM Ranch using a piggyback PCB.

•RS-232 or USB primary host interface using MCP protocol.

•Auxiliary RS-232 interface to support an external interface.

•Small and attractive desktop enclosure with easy access to Optional SAM(s). Also provides facilities for cable strain-relief and card-jam clearing.

•FLASH programmable

•Dual Color LED status indicator.

•Single cable with remote power pack. Power is routed through communications cable.

•Optional Tamper Switch

1