Compaq 400 486 DX2/40 MHZ 250 MB 4 MB 9.5, 400C 486 DX2/40 MHZ 250 MB 4 MB 9.5, 400CX 486 DX2/40 MHZ 250 MB 4 MB 8.4, 410 486 DX2/50 MHZ 250 MB 4 MB 9.5, 410C 486 DX2/50 MHZ 250 MB 4 MB 9.5, 410C 486 DX2/50 MHZ 350 MB 4 MB 9.5, 410CX 486 DX2/50 MHZ 350 MB 4 MB 8.4, 420C 486 DX4/75 MHZ 350 MB 4 MB 10.4, 420C 486 DX4/75 MHZ 420 MB 8 MB 10.4, 420CX 486 DX4/75 MHZ 420 MB 8 MB 10.4, 430C 486 DX4/100 MHZ 420 MB 8 MB 10.4, 430C 486 DX4/100 MHZ 720 MB 8 MB 10.4, 430CX 486 DX4/100 MHZ 720 MB 8 MB 10.4 245

5.Remove the left and right clutch ground clips (see "Removing and Replacing Clutch Ground Clips" in this section).

6.Pull up both ends of the ZIF connector slide simultaneously [1], carefully opening the slide [2] (Figure 3-186).

7.Lift the display cable out of the connector slide [3], being careful not to pull or twist the cable (Figure 3-186).

8.Remove the display ground cable [1] away from the LIF clip (Figure 3-187).