Compaq D-1H specifications General, USB Connectors, Front Control Panel, Function

The instructions given here are partial abstracts from the Operating Instruction Manual. The page numbers shown reflect those of the Operating Instruction Manual.

USB Connectors

The base of the monitor has two Universal Serial Bus (USB) connectors. Use USB connector ❶ to connect the USB signal cable∗ to the computer. Use USB Connector ❷ to connect USB compatible plug and play devices such as a keyboard, mouse, or joystick if supported by your computer. This feature provides USB pass-through and does not support USB host requirements.

CAUTION: This USB connector is not designed for use with high speed USB devices such as a video camera, scanner, etc. Compaq recommends connecting high speed devices directly to the computer.

✎These USB connectors operate as a pass-through system. Your computer must have a USB host controller installed for any USB-connected devices to operate.

CAUTION: To prevent deterioration of signal transfer or malfunction of USB devices, USB cables should not exceed the combined length of 9.75 feet (3 meters). This length includes both the USB signal cable and the USB peripheral cable.

∗A USB signal cable is not supplied with this monitor.

SECTION 1 GENERAL

Operating the Monitor

				Front Control Panel
No./ Icon			Control	Function
			Contrast	Adjusts contrast by turning control to left or
				right.
			Brightness	Adjusts brightness by turning control to left or
				right.
				1.	Launches on-screen display.
			Select button
				2.	Selects function adjustments.
		−		3.	Exits menus and on-screen display.
			Minus button	Selects and adjusts the functions.
	+		Plus button	Selects and adjusts the functions.
			Power switch	Turns the monitor on and off.
			Power LED	1. Green indicates monitor is turned on.
				2.	Yellow indicates suspend mode.
				3.	Amber indicates sleep mode.