A Check of the Supplied Items and the Names of the Parts

Names and Functions of the Parts (Input/Output Connectors)

1

2

3

4

5

RGB-IN 2

PC AUDIO

IN2

USB

 

RGB-IN 1

 

RGB-OUT

TEST

 

 

 

PC AUDIO PC AUDIO

S-VIDEO

V

L

R

IN1

OUT

 

VIDEO

 

1.PC Video Input

Input terminal for the PC analog RGB signals. Two per- sonal computers can be connected. See Page E-16.

6 7 8 9

5.Test (maintenance) connector

This special connector is used at the time of maintenance and factory tests. It cannot be used for other connections.

2.PC Audio Input

Audio input terminal for a PC (stereo compatible). Two per- sonal computers can be connected. See Page E-16.

3.RGB Video Output

When OHP is selected, OHP images are output. When PC/VIDEO input is selected, input PC video is output as it is. During standby, RGB-IN1 images that are input from the personal computer are output directly. See Page E-16.

4.USB connector

This connector is used for USB connections with a per- sonal computer.

Please see the "iP Viewer Software Program Operating In- structions".

6.Audio Output

Audio output terminal for projector.

This terminal outputs audio (either from the PC or video source) that is currently being input. In the standby mode, PC audio is output. When OHP input is selected, PC audio is output.

See Page E-16.

7.S-VIDEO Input

Input terminal for video source (Y/C). See Page E-20.

8.Video Source Video Input

Input terminal for video source (NTSC/PAL/SECAM). See Page E-20.

9.Video Source Audio Input

Audio input terminals for a video source (stereo compatible). See Page E-20.

E-10