Adjustment of the Projection Image
Adjusting the Projection Image
Adjust the projection image to the screen.
Right angle
•When the image is shifted to the left or right, move the projector horizontally. (Align the center of the screen with the center of the projector lens.)
•When the image is shifted up or down, use the tilt foot to adjust the projector vertically.
•When the image is slanted, turn the left or right tilt foot to adjust.
•When there is keystone distortion of the image, adjust with "Keystone" of the menu operations. → See Pages
Making Focus/Zoom Adjustments
Turn the focus ring/zoom lever of the projection lens and adjust the projection image.
Adjusting the Tilt (Slant)
The position and tilt angle of the projected image can be adjusted by adjusting the adjustable feet. Press both the left and right tilt adjustment levers to lift the main unit, and release them when the desired height is reached. You can
UpDown
Down | Up | Adjustable feet |
•Do not lengthen the tilt foot on only one side which would place the projector on an extreme slant. Doing so could result in the projector slipping or falling over and could cause an accident or breakdown.
•When moving the projector, be sure to return the tilt foot to the original position.
CAUTION • The air intake vents on the side of the projector draw in cooling air with a strong air current. When cloth or paper adheres to and covers the air intake vents, the internal temperature rises and could cause an accident or breakdown.
•Depending upon the material of the placement location, the rubber feet may soil on the placement surface.