Regular Operation
Adjusting the Brightness
To change the brightness, perform a manual adjustment using the method described below.
Operation with the Projector |
|
Adjust using the BRIGHTNESS ( | ) buttons. |
: Projection image becomes brighter 
: Projection image becomes darker
| Operation with the Remote Control |
Brightness adjustment bar | Adjust using the BRIGHTNESS |
| (+) : Projection image becomes brighter |
|
NOTE: Once the brightness adjustment bar has been displayed, it will disappear after 10 seconds if there is no brightness ad- justment.
Capturing the Projection Image Effective Only with OHP Input / Still Image Display
During OHP Input
Pressing the FREEZE/CAPTURE button captures the OHP image that is currently being projected and saves it as an image file.
The captured images are automatically stored in internal memory as OHP history images to maximum of 32 im- ages.
The projected image will freeze at this time.
USB Connection Is Available
By transferring the images that are in memory to the personal computer, they can be stored again in the
The USB icon is displayed at the time of image capture. The icon display will differ depending on the current number of memory pages.
Operation with the Projector
Press the FREEZE/CAPTURE button.
Operation with the Remote Control
Press the FREEZE/CAPTURE button.
(1 to 10 pages 
/ 11 to 20 pages 
/ 21 to 32 pages 
)
*When saving is no longer possible, 
will be displayed. Please see Page
USB Connection Is Not Available
When the maximum number of stored images has been exceeded, each time an image is captured the oldest image will be deleted.
The Freeze icon is displayed at the time of image capture.
1 | 2 | 32 |
Each time a new image is cap- tured, the oldest image is deleted.