Regular Operation

This section describes the use of direct operation using the projector and remote control buttons.

Please see the items on Page E-32 "Menu Operation Method" and Page E-35 "Menu Description" for information about operation using the menu.

Select the Input

When the power of the projector is switched on, the input selection (OHP / PC1 / PC2 / VIDEO) icon is displayed.

1 2

PC1 PC2 VIDEO

OHP

NOTE:

Operation with the Projector

Select the input using the INPUT SELECT buttons. Each press switches the input one step in the sequence of OHP → PC1 → PC2 → VIDEO.

Operation with the Remote Control

Select the input using the INPUT SELECT buttons.

•The input mode at starting time will be the same as it was the last time the projector was switched off.

•When the icon is displayed, either the left or right key permits input switching.

Changing the Orientation of the Projection Image Effective Only with OHP Input

This operation switches the (vertical/horizontal) orientation of the currently projected image. The display of the switched screen is adjusted to match the width.

Operation with the Projector

Press the PORTRAIT button.

C

B

A

Operation with the Remote Control

Press the PORTRAIT button.

E-23