Maintenance
Lamp Unit Replacement Procedure
To prevent burns, wait one hour or longer after the lamp has been switched off before performing the following procedure.
1 Remove the lamp unit cover
Using a minus screwdriver, loosen the screws of the lamp unit cover, pull in the direction of the arrow, and remove the cover.
2 Loosen the mounting screws of the lamp unit
Using a minus screwdriver, loosen the 2 screws of the lamp unit.
3 Pull out the lamp unit
Hold the handle of the lamp unit and pull it up and out.
4 Install a new lamp unit
Take the lamp unit and press it into the projector. Tighten the 2 mounting screws of the lamp unit.
Align the 2 tabs located on the lamp unit cover with the projector and attach from the side of the tabs. Tighten the mounting screws of the lamp unit cover.