Compaq MP2800 warranty Symbol, Control, Function, Using the Projector

Symbol		Control	Function
		Standby button	Powers the projector lamp on and
￿
			off. The Standby LED changes
			color modes to indicate the
			following operating modes:
			1. Flashing amber indicates the
			projector is going into standby
			mode and cannot be restarted
			until the LED glows amber
			steadily.
			2. All five LED buttons rapidly
			flashing amber indicate the
			lamp has overheated and the
			projector has automatically shut
			down.
		Select button	1. Launches first, second, and
			third-level on-screen menus.
			2. Exits the on-screen menus.
	−	Minus button	Selects and adjusts the on-screen
			scroll down menu functions.
+		Plus button	Selects and adjusts the on-screen
￿			scroll up menu functions.
	R	Resync button	Automatically synchronizes the
			projector to track the input source.

IMPORTANT: To use standby mode, press the Standby button and, after a six to ten-second delay, the unit enters Standby mode and the projector lamp turns off. A “Going to Standby” message appears on the screen for the duration of the six to ten-second delay. When the message disappears from the screen, there is a 45-second delay before the lamp can be turned back on. Wait 45 seconds to allow the lamp to cool before pressing the Standby button again.

Using the Projector 23