Compaq MP2800 warranty Connecting the Projector to a Compaq PC Companion

4.Press the blue Standby button on the top of the projector to turn on the projector first, then turn on the computer.

✎For security purposes, this projector has been fitted with a security lock slot ➌ (located on the left, front side) for use with a security cable lock that can be purchased separately at most computer stores.

Connecting the Projector to a Compaq PC Companion

To connect the projector to a Compaq PC Companion, the PC Companion must have a male connector adapter and a VGA-out PC Card with a 15-pin connector.

✎The VGA-out PC Card with the 15-pin connector is not included with the Compaq PC Companion. It is sold separately. For information on purchasing this card, call your Compaq authorized dealer or reseller. To locate a reseller near you, check the “Worldwide Telephone Numbers” booklet that came with your projector or visit the Compaq website at http://www.compaq.com.

1.Rotate the elevator foot to balance the projector.

2.Connect one end of the signal cable ➊ to the projector and connect the other end to the VGA-out PC Card. The VGA-out PC Card may be inserted into the PC slot on the Compaq PC Companion before or after connecting the signal cable.

✎Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector.

Getting Started 11