■Keystone—Adjusts image distortion at the top and bottom widths of the screen caused by tilting the projector.
■Picture—Adjusts the gamma value or degree of contrast of darkness or light for the projected image.
■Color—Adjusts color balance to compensate for ambient conditions using three submenus:
■Factory default.
■Custom Color—Modifies the color temperature balance.
■Saturation—Magnifies the color intensity.
■Digital Conversion—Improves picture stability of user modes by adjusting:
■Clock—Increase/decrease the value to stretch or shrink the image on the screen.
■Clock Phase—Increase/decrease the value to minimize video distortion or video jitter.
✎If the projector image becomes distorted when adjusting the Clock and Clock Phase values, continue adjusting the values until the distortion disappears. To restore the factory settings, select Factory Reset in the on-screen menu, or press the Resync button.
■Language—Allows the user to change the On-Screen display to one of the languages in their native spelling. The current language is highlighted. Select another language to display all menu functions in that language.
■Menu Location—Positions the on-screen menu at a convenient location on the projector screen; positions the menu up or down, left or right.
■HDTV Setup—Allows the user to stretch the format to fill the screen or to use the original aspect ratio and fill the screen, using HDTV (High Definition Television) format. Refer to the “HDTV” section later in this chapter for more information.
■Management—Allows the user to control power saver characteristics of the display, or to view the cumulative lamp hours, reset the lamp hour timer, view the unit’s serial number, or perform a Master Reset.
