Memorex Flat Screen Tv manual Basic Operation continued, Switching from AV to TV, GUIDE1/1

Basic Operation (continued)

Select Input	Watching AV program
Source

DISPLAY button

GUIDE button

This TV set provides 2 groups of AV input terminals and one group of COMPONENT input terminals for your convenient connection to VCR, DVD or other video equipments.

To watch a video program from AV inputs, press INPUT button repeatedly until you see the appropriate input indicator on the screen.

AV1 AV2 COMPONENT 8-0

MONO

Note: S-VIDEO input uses the same circuit as VIDEO1, and the S- VIDEO terminal overrides the VIDEO1 terminal. When both S-video and video1 signal are input, the S-video signal is selected and the OSD is "SVIDEO". To view video1signal, disconnect the S-VIDEO connection.

Switching from AV to TV

Press INPUT button on the remote controller.

Press this button repeatedly until the picture of TV program appears.

Displaying the information banner

The information banner displays status information such as channel number and signal source. Depending on the mode, different information is displayed. In DTV mode, more information (such as channel number and channel name, signal resolution, etc.) can be displayed.

Press DISPLAY button and the information banner appears.

Using the program guide

You can press GUIDE button on the remote control to display guide information if available. You can obtain program broadcasting time and program name from the guide.

Note:

The GUIDE works only with digital channels.

GUIDE1/1

07:00PM-08:00PM WGBH-S

WGBH DTV Broadcast Signal

08:10PM-10:00PM WGBH-S

WGBH DTV Broadcast Signal

Press or to scroll page if	(Example)
there are two or more pages.

14