Memorex Flat Screen Tv manual Tuning in continued, Skipping an unnecessary channel

PRESET

AUTO PROGRAM

CH SETUP

Tuning in (continued)

Skipping an unnecessary channel

After saving channels into memory, you can skip unnecessary channels so that only the channels you want to watch are selected with the CH+/- buttons.

1	Enter the PRESET menu, press or button to select CH
	SETUP item.
2	Press	or	button to enter CH SETUP menu.
3	Press	or	button to select CH NO. item.
4	Press	or	button to select a channel number (for
	example, channel 2-2).

MENU

5

6

Press	button to select SKIP item.
Press	or button to set to ON.

Now channel 2-2 will be skipped when you browse channels by CH+/- button.

To restore a skipped channel, please use digit buttons to select the skipped channel, then repeat the above steps and set the SKIP item to OFF.

CH SETUP

CH NO	2-2
SKIP	ON
LABEL	WGBH-DX
DIG SIGNAL	25DB

Menu navigation button

Checking the DTV signal strength

You can check the strength of your DTV signal and determine whether you need to adjust your antenna or digital cable input. The stronger the signal strength, the less likely you are to experience picture degradation.

Exit the menu

Enter the PRESET menu, press	or
button to select CH SETUP item,
press or button to enter	CH

SETUP menu. Now the menu bottom line shows the signal strength for the current DTV channel.

CH SETUP

CH NO	2-2
SKIP	ON
LABEL	WGBH-DX
DIG SIGNAL	25DB

Viewing channel label (Only for DTV programs)

You can make use of the information banner to know the channel label for the current DTV program. You can also open the CH SETUP menu and view the channel label . Note that the channel labels are automatically assigned and can not be changed by users.

16