MSB900/L Detailed Technical Manual V1.0 |
10.2. The COM1/LPT Serial Interface Cable
Terminal for dual row 2mm grid and 1mm flat cable.
Connector X61
Pin | Signal | COM1 9pin |
|
|
|
Pin 1 | = DCD | 1 |
Pin 2 | = DSR | 6 |
Pin 3 | = RXD | 2 |
Pin 4 | = RTS | 7 |
Pin 5 | = TXD | 3 |
Pin 6 | = CTS | 8 |
Pin 7 | = DTR | 4 |
Pin 8 | = RI | 9 |
Pin 9 | = GND | 5 |
Pin 10 |
|
|
Pin | Signal | LPT1 25pin |
|
|
|
Pin 11 | = SELECT | 13 |
Pin 12 | = Paper end | 12 |
Pin 13 | = Busy | 11 |
Pin 14 | = Acknowledge | 10 |
Pin 15 | = Data 7 | 9 |
Pin 16 | = Data 6 | 8 |
Pin 17 | = Data 5 | 7 |
Pin 18 | = Data 4 | 6 |
Pin 19 | = Data 3 | 5 |
Pin 20 | = Shift in | 17 |
Pin 21 | = Data 2 | 4 |
Pin 22 | = Init | 16 |
Pin 23 | = Data 1 | 3 |
Pin 24 | = Error | 15 |
Pin 25 | = Data 0 | 2 |
Pin 26 | = Autofeed | 14 |
Pin 27 | = Strobe | 1 |
Pin 28 | = GND |
Attention!
•Do not short circuit these signal lines.
•Never connect any pins on the same plug or to any other plug on the MICROSPACE MSB900/L. The
•Do not overload the output; the maximum output of the current converters is 10mA.
56