MSB900/L Detailed Technical Manual V1.0 |
10.3. The COM2 Serial Interface Cable
DT terminal for dual row 0.1" (2.54mm grid) and 1.27mm flat cable.
Connector X39
Pin | Signal | COM2 9pin |
|
|
|
Pin 1 | = DCD | 1 |
Pin 2 | = DSR | 6 |
Pin 3 | = RXD | 2 |
Pin 4 | = RTS | 7 |
Pin 5 | = TXD | 3 |
Pin 6 | = CTS | 8 |
Pin 7 | = DTR | 4 |
Pin 8 | = RI | 9 |
Pin 9 | = GND | 5 |
Pin 10 |
|
|
Attention!
•Do not short circuit these signal lines.
•Never connect any pins on the same plug or to any other plug on the MICROSPACE MSB900/L. The
•Do not overload the output; the maximum output of the current converters is 10mA.
57