Replacing the Hard Disk Drive
Replacing the Hard Disk Drive
To replace the hard disk drive
You’ll need a small Phillips screwdriver for this procedure.
1.Unplug the AC adapter if you’re using one, and remove the battery.
2.Turn the unit bottom side up.
3.Use a pointed tool to remove the plugs from the two screw holes, and then remove the two screws.
4.Gently pull the hard drive out of the computer.
| 5. | Gently slide the new drive into the hard drive compartment. Press firmly to make sure |
|
| the connector seats properly. |
| 6. | Reinstall the hard drive screws and plugs. |
|
| |
Important | If you are installing a new hard disk drive, you should create a Utility partition on the | |
| drive before loading any software. See “To recover the factory installation of your hard | |
| disk” on page 47. | |
|
|
|
To install the holder on a new hard disk drive or prepare a new hard disk for use, see “Replacing the Hard Disk Drive” in the Reference Guide on the Documentation Library CD included with your computer.
Startup Guide | 37 |
