2.1GENERAL
A.All process piping materials (such as hose, rigid piping, valves or filters) used in process water piping circuitry must be rated for 100°F minimum temperature and 100 PSI minimum pressure.
B.All such materials must have the equivalent or larger diameter of the particular process connection that length of process water piping is connected to.
From process connection:
connect to “water out” on process manifold
To process connection: 
connect to “water in” on process manifold
2.2TO AND FROM PROCESS CONNECTIONS
A.Connect the chiller’s “to process” connection to the “water in” manifold on the mold or process.
B.Connect the chiller’s “from process” connection the “water out” manifold at the mold or process.
C.Process water piping circuitry should be designed to avoid an excessive use of elbows and/or lengths of pipe or hose. If hose is the material of choice, avoid tight twists or curls and excessive lengths.
D.Valves and filters may be installed in the process water piping circuitry to facilitate service and maintenance provided that such devices maintain the full inside diameter of the process connection. If installed, all such devices must be open and clean during unit operation.
Page: 10 | VL Series Portable Chillers, 0.25 to 1.5 Tons | UGH020/0301 |
