Every time when you run print server’s configuration utility, click the “Search” icon
on the tool bar. The configuration utility will delay for several seconds because the utility is using system’s available network protocols to search for all print servers on the network. All available print servers will be listed under “Print Server Group” on the left side of the window.
You must select the print server you would like to configure from the list. The system will, at the same time, display the selected print server’s status on the right side of the window.
7.3Status of Print Server
Click “Status” icon
on the tool bar, the status of the current selected print server will be showed on the right side of the window.
The information of the print server displayed are MAC ID, Model Type, Firmware Version, status of each printer port, NetWare file server name, NetWare file server polling interval, NetWare printer queue names, IP address, subnet mask, default gateway, AppleTalk printer type, AppleTalk zone and print server printing ability…etc.
You can refresh the print server’s status by pressing the “Refresh” button 
.
You can restart the print server by pressing the “Reboot” button 
.
33
