Concord Camera 2000 manual Loading the Battery, Checking the Battery

Loading the Battery

The camera uses one 3V CR123 lithium battery.

Loading the Battery:

1.Locate the battery door on the bottom of the camera.

2.Slide the battery door outwards, as indicated by the arrow and lift the battery door to open. (fig.1.1)

3.Insert the 3V CR123 lithium battery with the positive terminal (+) toward the inside of the battery compartment.

4.Close the battery door, press down on it and slide it towards the center of the camera until it snaps into place.

fig.1.1

fig.1.2

Note: Remove the batteries from the Concord Eye-Q Go 2000 if the camera will not be used for an extended period of time to prevent corrosion or battery leaks.

Checking the Battery

The camera has a battery indicator that shows the current battery level.

FULL

Batteries are full and ready to use.

LOW

Batteries are low and need to be replaced soon.

9