Concord Camera 3.1 Megapixels Digital Camera manual Setting the Flash, To set the flash

TAKING A PICTURE

SETTING THE FLASH

A	3M	28/45	3M	28/45
AWB			AWB

En

fig. 1.1 fig. 1.2 fig. 1.3

To set the flash:

Press / repeatedly until the desired indicator appears on the LCD.

Flash Mode Description

AAuto Flash (Default) The camera judges if a flash is required. If the environment is too dark, the flash will fire.

A	Auto + Red-Eye	Use this mode to reduce the occurrence of “red-eyes” when taking pictures
		with a flash. The camera will automatically detect when the flash is needed
		and the flash will fire after a short delay.
	Flash ON	Flash will fire in any lighting condition. The “red-eye” reduction function also
		included in this mode.
	Flash OFF	In this mode, the flash will not fire, regardless of the lighting condition. Use
		this mode to capture the mood of ambient lighting. This mode is also useful
		for places that prohibit flash photography, such as museums, aquarium,
		archeological exhibitions, etc.
		• To prevent blurry pictures in dim-lighting environment, hold the camera
		steady when pressing the Shutter button or mount the camera on a tripod.

Note:

•The flash needs to recharge after it is fired. If the Shutter button is pressed when the flash is charging, the Flash Ready LED will blink. Wait for a short while, then press the Shutter button again to take a picture.

•Some of the scene selection will deactivate the flash setting. For more information, refer to p. 20.

12