![](/images/new-backgrounds/1317751/317751113x1.webp)
CONNECTING THE CAMERA TO THE COMPUTER
CONNECTING THE CAMERA TO THE COMPUTER
En
Windows 98/98SE users - Do not connect the camera to your computer BEFORE the camera drivers and Microsoft DirectX 9 installation is completed.
1. Power the camera on. 2. Connect the camera to the computer with the
• Plug the larger end of the
information on the location of the USB port.)
• Plug the small end of the
3. When the camera is connected to the computer for the first time, the camera
USB Mass Storage driver installation will begin. Please follow the
DOWNLOADING PICTURES AND VIDEO CLIPS ONTO YOUR COMPUTER
Note: Windows 98/98SE users must install the Camera Driver and DirectX 9 first. (Page 49)
Note: Windows 2000 users must install DirectX 9 to view video clips on the computer. (Page 51)
Downloading files from the camera:
•Insert the memory card.
Caution: Do not attempt to open the battery/memory door to insert or remove the memory and/or batteries when the camera is connected to the computer.
FOR WINDOWS USERS
Downloading Pictures and Video Clips onto your computer:
1.Connect the camera to the computer.
2.
3.
4.
5.
•The pictures (JPEG) and video clips (AVI) stored in the memory will be displayed.
6.Click and drag the files into a directory in your computer to save them.
•To select all files, click Edit > Select all.
FOR MACINTOSH USERS
1.Connect the camera to the computer.
•After a few moments, the external hard drive will appear on the desktop.
2.
3.
4.
•The stored pictures (JPEG) and video clips (AVI) stored in the memory will be displayed.
5.Drag and drop the image you want to save in the computer.
•To select all files, click Edit > Select all.
Note: You may also transfer the stored pictures and video clips onto your computer by using a memory card reader (sold separately.)
56