4-28 Chapter 4: Appendix F - SLIM Insertion/Removal

SLIM insertion

Figure 24 outlines the correct procedure for inserting an RS-232, RS-485/422 and 20mA Current Loop Serial Line Interface Module (SLIM).

Figure 24: SLIM insertion (ACM/Flex16)

1

2

Hole

Peg

Clip

1.Place the SLIM into the socket almost vertically (about 75- degree angle), making sure that it is properly oriented and fully inserted into the socket.

2.Press downward and sideways on the SLIM until it latches into the socket. Do NOT force the SLIM, the installation process requires a small force and should be very smooth and easy. If you encounter resistance then re-check the orientation and insertion depth.

Intellicon-NT960/PCI User's Manual, ver. 0.02