Contec RT-U62CD operating instructions ALL SmartKey, Volume Control

Synergy.doc

Example: For code “035”, the remote will blink 10 times, then 3 times, then 5 times.

To identify the 3-digit VCR code, press [VCR], then [OK] in step 1, then press [INFO].

To identify the 3-digit DVD code, press [DVD], then [OK] in step 1, then press [INFO].

To identify the 3-digit AUDIO code, press [AUDIO], then [OK] in step 1, then press [INFO].

9. ALL SmartKey®

Once you have programmed the remote to operate your electronic devices, you can press the [ALL] SmartKey® to turn your Cable set-top terminal and TV on / off with one button press. You can also program the [ALL] button to turn on / off additional electronic devices and / or tune your TV to its correct output channel.

Programming the [ALL] SmartKey®

1.Press [ALL], then [MENU] together until the [CBL] button illuminates.

2.Enter one of the following options on the keypad of the remote:

[0]- Turns on / off CBL + TV (default setting)

[1]- Turns on / off CBL + TV and tunes TV to output Channel 3.

[2]- Turns on / off CBL + TV and tunes TV to output Channel 2.

[3]- Turns on / off CBL + TV and tunes TV to output Channel 4.

[10] - Turns on / off CBL + TV + VCR + DVD

[4]- Turns on / off CBL + TV + VCR + DVD and tunes TV to output Channel 3.

[5]- Turns on / off CBL + TV + VCR + DVD and tunes TV to output Channel 2.

[6]- Turns on / off CBL + TV + VCR + DVD and tunes TV to output Channel 4.

[11] - Turns on / off CBL + TV + VCR + DVD + AUDIO

[7]- Turns on / off CBL + TV + VCR + DVD + AUDIO and tunes TV to output Channel 3.

[8]- Turns on / off CBL + TV + VCR + DVD + AUDIO and tunes TV to output Channel 2.

[9]- Turns on / off CBL + TV + VCR + DVD + AUDIO and tunes TV to output Channel 4.

[12]- Turns on / off CBL + TV + AUDIO

[13]- Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 3

[14]- Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 2

[15]- Turns on / off CBL + TV + AUDIO and tunes TV to output Channel 4

3.As soon as you select an option, the [CBL] button will blink 3-times and go out.

Using the [ALL] SmartKey®

When pressing the [ALL] SmartKey®, be sure to keep the remote control aimed at your electronic devices until your electronic devices turn on or / off.

Whenever the [ALL] SmartKey® is pressed, the mode of the remote control will automatically switch back to Cable.

10.Volume Control

When you first program your remote, volume / mute are controlled through your TV (except AUDIO which defaults to the AUDIO device). The volume control options in each mode of the remote are:

CBL	TV (default), Cable or Audio.
TV	TV (default), Cable or Audio.
VCR	TV (default), Cable or Audio.
DVD	TV (default), Cable or Audio.

- 11 -