Synergy.doc
- 3 -
2. From the Cable Setup Code list, locate the 3-digit code for your brand / model and enter it on the keypad
of the remote control. The set-top terminal will turn off.
3. Then, press [OK] to lock in the code. The power / mode buttons will blink 3-times and go out.
Cable Setup Codes
Motorola
DCT (all except DVR)
CFT 2200
DCT – 62xx series DVR terminals
Jerrold
DL4, DP(V), DQN(V), DPBB
001
001
002
003
Scientific Atlanta
Explorer® 8000 (SARA - RT-U59C)
Explorer® 8000 (Passport - RT-U61CP)
Explorer®
8600X
8600
412
413
004
005
006
Pace
510 Digital
HD Digital
004
010
Pioneer
Voyager®
BA-V1000, BA-V2000
004
007
Tocom
5503VIP, 5507, 5508
008
Zenith
MM 2500
Digital
009
013
5. Programming Your TV, VCR, DVD, and AUDIO Devices
Code-Entry Programming
1. Turn on all the electronic devices (TV, VCR, DVD, AUDIO) you want to program the remote to operate.
2. Press [OK], then [MUTE] together until the power / mode buttons illuminate in slow-rotation (i.e. CBL Æ
TV Æ VCR Æ DVD Æ AUDIO Æ CBL…).
3. a. To program your TV, locate the 3-digit code for your brand in the TV Setup Code list and enter it on the
keypad of the remote control. Entry of the correct code will cause your TV to turn off. If multiple codes
are listed for your brand, you may have to try several different codes until your TV turns off.
b. As soon as you have entered a 3-digit code that turns your TV off, press [MUTE].
1. If the TV turns back on, press [OK] to lock in the code. The power / mode buttons will blink 3-
times and go out.
Or
2. If the TV does not turn back on, enter a different 3-digit setup code until your TV turns back on.
Then press [OK] to lock in the code. The power / mode buttons will blink 3-times and go out.
4. To program your VCR, refer to the VCR / DVD Setup Code lists and repeat steps 2 and 3 above.
5. To program your DVD, refer to the VCR / DVD Setup Code lists and repeat steps 2 and 3 above.
6. To program your AUDIO equipment, refer to the AUDIO Setup Code list and repeat steps 2 and 3 above.