7. Hardware Monitor
SEH-9450-LAS 35
7. Hardware Monitor

Hardware Monitor

Hardware Monitor function is included in Hardware Monitor controller (Winbond W83627HF) on this
product.
You can read Temperature, Voltage and Fan Sensor output of SBC.

Temperature

Two Thermistor are mounted on SBC as following. You can read Temperature of this position.

Voltage

You can read +3.3V, +5V, +1.05, +1.8V, +1.5V, 5VSB, Vcore of SBC.
VTT(1.05V) : CPU I/O voltage
Vcore : CPU core voltage

Speed Sensor

FAN Speed Sensor signal is input in FAN1 / FAN2 pin3 when you use FAN with speed sensor. You
can read FAN speed.
CAUTION
You must use FAN with speed sensor if you would like to read FAN Speed.