1. Introduction
SEH-9450-LAS 1
1. Introduction

About the SBC

This product is a half-size sized single-board computer that supports PICMG1.3.
It uses Intel (R) 945GME Chipset. The supported CPU is Intel (R) Core Duo / Core 2 Duo processor.
For the memory, up to 4 GB (total capacity : 3.1GB) of DDR2 SDRAM can be mounted.
The all-in-one design features a wide variety of interfaces including Analog RGB, LVDS, SDVO,
USB2.0 x 4, SATA x 2, 1000BASE-T/100BASE-TX, audio, IDE, serial and PS/2 Keyboard/Mouse.
When used in combination with the optional PICMG1.3-compatible Backplane BEH-0611, you can use
the PCI Express / PCI bus expansion board on it.
The built-in CF card slot (Type I/II) enables boot-up from a CF card.
When to connecting external devices or building the system, please read this manual carefully.

Features

- Half-size single-board computer supporting PICMG1.3
This PICMG1.3-compatible half-size model, when used in combination with a PICMG1.3 backplane,
allows you to build a system configuration that uses the PCI Express / PCI bus expansion board.
- Adoption of 945GME Chipset to allow the mounting of Intel Core Duo / Core 2 Duo processor
The use of Intel (R) 945GME + GMCH, ICH7M-DH, FWH Chipset allows you to incorporate
M-socket-compatible Intel (R) Core Duo / Core 2 Duo processor (FSB 533/566MHz) CPU.
- Max. 4 GB (total capacity : 3.1GB) of DDR2 SDRAM
For the memory, up to 4 GB (total capacity : 3.1GB) of DDR2 SDRAM(400/533/667MHz) can be
mounted.
- The all-in-one design features a wide variety of interfaces.
This product comes with interfaces such as Analog RGB, LVDS, SDVO, USB2.0 x 4, SATA x 2,
1000BASE-T/100BASE-TX, audio, IDE, serial and PS/2 interfaces.
- Equipped with a CF card slot (Type I/II), enabling boot-up from a CF card.
Equipped with a CF card slot (Type I/II), enabling boot-up from a CF card. It can also be used through
IDE compatibility (True IDE) with ATA/ATA-4.