Contec SPI-8451-LLVA, SPI-8451-LVA, SPI-8452-LLVA - page 77

6. RAID Controller
70 SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
Creating Password
To create a password, check the Enable Password checkbox in the Preferences section. The “Set
Password” window will appear.
Type the password you want to use. Press the Tab key or click to retype the same password in the
“Confirm New Password” section. Click the OK button.
CAUTION
Remember to record the password you use in a secure place in case you forget it.
A confirmation screen will appear shown that “Password Checking is Enabled”. Click the OK button.
Once the password feature is enabled, the following menu will appear before the FastCheck™ window
can be opened is enabled, the following menu will appear on each use of FastCheck.
Changing Password
1. Input the original password you first created to gain access to FastCheck.
2. Click on Options tab, and then click on the Change button in the Password section. The Set Password
screen will appear.
3. Type the password you want to use. Press the Tab key or click to retype the same password in the
“Confirm New Password” section.
4. Click OK button.
Disabling Password
1. Input the original password you first created to gain access to FastCheck.
2. Click on Options tab
3. Uncheck the “Enable Password” checkbox. Click Apply button on Options window.