8. BIOS Setup 92 SPI-8451-LLVA, SPI-8452-LLVA, SPI-8451-LVA
Description Choice
Init Display First
Initialize the on board video display before initializing
any other display device on the system. Thus the on
board display becomes the primary display.
(Only SPI-8451-LLVA and SPI-8452-LLVA are
effective.)
Onboard LAN
Select Enabled to active the onboard GIGA-LAN
controller, select Disabled to turn-off the onboard
GIGA-LAN controller when you do not want to use
this function.
(Only SPI-8451-LLVA and SPI-8452-LLVA are
effective.)
Intrernal LAN
Select Enabled to active the onboard 10/100-LAN
controller, select Disabled to turn-off the onboard
10/100-LAN controller when you do not want to use
this function.
RAID Function
Select Enabled to active the onboard RAID controller,
select Disabled to turn-off the onboard RAID
controller when you do not want to use this function.
(Only SPI-8451-LLVA is effective.)
IDE HDD Block mode
Block mode is also called block transfer, multiple
commands, or multiple sector read/write. If your IDE
hard drive supports block mode (most new drives do),
select Enabled for automatic detection of the optimal
number of block read/writes per sector the drive can
support.