2
TABLE of CONTENTS
Pg | INTRODUCTION | Pg 9 | OPERATION / MAINTENANCE |
| Warranty |
| Operating Instructions |
| General Instructions |
| Maintenance |
| General Information | 10 | REPLACEMENT BLOWER |
| Care of Glass & Plated Parts | ||
|
|
| |
INSTALLATION | 11 | ADJUSTMENTS | |
| Pilot Burner Adjustment | ||
| Insert Vent Connection |
| |
|
| Vent Restrictions | |
| Chimney Connection |
| |
|
| Venturi Adjustments | |
| Wall Switch / Thermostat |
| |
|
|
| |
| Gas Pipe Installation | ||
FINISHING |
| Ordering Replacement Parts | |
| Replacement Parts | ||
| Trim Extrusion Installation |
| |
|
| Terminal Kits | |
| Log Placement |
| |
|
| Accessories | |
| Door Installation |
| |
|
|
| |
| Mantle Clearances | ||
| Logo Placement | 16 | SERVICE HISTORY |
|
| ||
PLEASE RETAIN THIS MANUAL FOR FUTURE REFERENCE
WARNING
•The fireplace insert is a vented
•Adults and especially children should be alerted to the hazards of high surface temperatures and should stay away to avoid burns or clothing ignition. Supervise young children when they are in the same room as the fireplace insert.
•Due to high temperatures, the fireplace insert should be located out of traffic and away from furniture and draperies.
•Clothing or other flammable material should not be placed on or near the fireplace insert.
•Any safety screen or guard removed for servicing must be replaced prior to operating the fireplace insert.
•It is imperative that the control compartments, burners and circulating blower and its passageway in the fireplace insert and venting system are kept clean. The fireplace insert and its venting system should be inspected before use and at least annually by a qualified service person. More frequent cleaning may be required due to excessive lint from carpeting, bedding material, etc. The fireplace insert area must be kept clear and free from combustible materials, gasoline and other flammable vapours and liquids.
•Under no circumstances should this fireplace insert be modified.
•This fireplace insert must not be connected to a chimney flue pipe serving a separate solid fuel burning appliance.
•Do not use this fireplace insert if any part has been under water. Immediately call a qualified service technician to inspect the fireplace insert and to replace any part of the control system and any gas control which has been under water.
•Do not operate the fireplace insert with the glass door opened, cracked or broken. Replacement of the glass should be done by a licensed or qualified service person.
•Do not strike or slam shut the fireplace insert glass door.
•This fireplace uses and requires a fast acting thermocouple. Replace only with a fast acting thermocouple supplied by Wolf Steel Ltd.
NOTE: changes, other than editorial, are denoted by a vertical line in the margin.
