Philips SCD589 user manual Contents EN, Preparing your baby monitor

Contents EN

22	Important information	25	Assistance
22	Technical specifications	26	Warranty

22Maintenance

23Environmental information

23Factory initialization mode

24Compliance information

24Radio Interference

25FCC RF Radiation Exposure Statement

Preparing your baby monitor

Baby unit

The baby unit can be operated by power supply or batteries. When batteries are inserted, you will have an automatic back-up in case of power supply failure.

Cord operated use

1Connect the power adapter cord (A-14) to the power supply jack (DC 9V / 300mA - A-13) of the baby unit.

2 Connect the AC power adapter (A-14) to a wall outlet.

➜The baby unit is now ready for cord operated use!

Battery operated use

1 Open the battery compartment by turning the cover (A-12) to the left (C OPEN), using the palm of your hand.

Take the cover off.

2 Insert four 1.5V AA batteries, noting the + and –
configuration inside the battery compartment (batteries are
not supplied; we recommend Philips Alkaline batteries).	+
	+

9