Setting room temperature range
You can set the temperature range (minimum and maximum
temperature) for your baby’s room.
•Select B– – °, using – and + (B-10).
Confirm with OK (B-7).
> Nappears on the display. Confirm with OK (B-7).
•Set the desired minimum temperature, using – and + (B-10).
Confirm with OK (B-7).
•Set the desired maximum temperature, using – and + (B-10).
Confirm with OK (B-7).
Note:When the set maximum temperature is lower than the
room temperature, the unit consumes more power
because the display is continuously lit.This is also the case
when the set minimum temperature is higher than the
room temperature.
Setting temperature alert
Temperature alert will sound from the parent unit if the actual
room temperature exceeds the set minimum or maximum
temperature or if the room temperature drops below 45°F or
rises above 91°F.
•Select B– – °, using – and + (B-10).
Confirm with OK (B-7).
•Select M, using – and + (B-10).
Confirm with OK (B-7).
•Select Cor V.
Confirm with OK (B-7).
Setting display temperature indication
You can choose degree Celsius (°C) or degree Fahrenheit (°F)
for temperature display.
•Select B--°, using – and + (B-10).
Confirm with OK (B-7).
•Select Unit, using – and + (B-10).
Confirm with OK (B-7).
•Select Fahrenheit or Celsius.
Confirm with OK (B-7).
Whenever the temperature unit is changed (e.g. from C to F),
the previously set low and high temperature levels for the alert
(i.e. in C) will be reset to defaults (i.e. in F). It needs to re-adjust
them if desired.
18