NOTES
The Home Cinema only supports Middle Quality SBC data (up to 237kbps@48kHz), and does not support High Quality SBC data (328kbps@44.1kHz).
The AVRCP feature is supported. It's functionality will differ, depending on the specifications of the connected device.
Connect only to a Bluetooth device that supports the A2DP Profile.
Only one Bluetooth device can be paired at a time. The search or connection functions may not work properly in the following cases:
-If there a strong electric field near or around the home cinema.
-If several Bluetooth devices are simultaneously paired with product.
-If the Bluetooth device is turned off, not in place, or malfunctions.
-Note that such devices as microwave ovens, wireless LAN adapters, fluorescent lights, and gas stoves use the same frequency range as the Bluetooth device, and can cause electric interference.
To disconnect the Bluetooth device from
the Home Cinema
You can disconnect the Bluetooth device from the Home Cinema. For instructions, refer to the Bluetooth device's manual.
•When the Home Cinema is disconnected from the Bluetooth device, the Home Cinema will display DISCONNECTED on the front display.
To disconnect the Home Cinema from the
Bluetooth device
Press the ( 
) button on the front panel of the Home Cinema to switch from BT to another mode or turn off the Home Cinema.
•Except when you disconnect the home cinema by changing functions, the connected Bluetooth device will wait a certain time for a response from the Home Cinema before terminating the connection. (Disconnection time may differ, depending on the Bluetooth device.)
NOTES
In Bluetooth connection mode, the Bluetooth connection will be lost if the distance between the Home Cinema System and the Bluetooth device exceeds 10 meters. When the Bluetooth device comes back into effective range or you restart the Bluetooth device, you have to pair the device and home cinema again to reconnect.
In Bluetooth mode, the screen saver will start if the Bluetooth device stays in the Ready state for 5 minutes. To reconnect the Bluetooth device, turn off the screen saver, and then connect the device. To turn off the Screen saver, press any button on the remote control (the Volume button, a number button, etc.)
Playing Photo Contents
You can play photo contents located on a DVD, USB, mobile device or PC.
Using the Tools Menu
During playback, press the TOOLS button.
Previous | Select to move to the previous | |
picture. | ||
Next | Select to move to the next picture. | |
Start / Stop | Select to play/pause the slide show. | |
Slide Show | ||
Slideshow | | Speed : Select to set a slide |
| show's speed. | |
Settings | Effects : Select to set a slide | |
|
| show's special effects. |
Zoom | Select to enlarge the current | |
picture. (Enlarge up to 4 times) | ||
Rotate | Select to rotate the picture. (This will | |
rotate the picture either clockwise | ||
| or counter clockwise.) | |
Background | Select to listen to music while | |
Music | viewing a slide show. | |
| | Picture Mode |
|
| - Dynamic : Choose to increase |
|
| Sharpness. |
|
| - Standard : Choose for most |
|
| viewing applications. |
Settings |
| - Movie : This is the best setting |
| for watching movies. | |
|
| - User : Lets you adjust the |
|
| sharpness and noise reduction |
|
| function respectively. |
| | Information : Shows the picture |
|
| information. |
Equaliser | Customize your own personal | |
sound preferences using the | ||
Mode | equaliser settings. | |
05 Media Play
