BP860 Cordless
Battery Powered
Soldering Tool
Thanks you for purchasing the BP860 battery powered cordless soldering tool from Weller. This is the latest in a line of both cordless and corded soldering and hot air tools from Weller - the world’s leading maker of soldering products. With proper care, your BP860 tool will give you years of reliable service.
BP860 is a lightweight, fast
Safety Notes
1.Tip is hot! Do not touch the tip or you may get severely burned.
2.Do not immerse in water!
3.Allow the tip to cool after use before storing away.
4.Place the protective cover over the tip when storing so that the cover secures the safety slide switch in the “OFF” position.
Operating Instructions
1.To install batteries, remove the battery cover by pinching the clips on the sides of the battery cover and lifting off.
2.Place (4) 1.5 V size AA alkaline batteries (included) into the iron as illustrated and replace the cover.
3.Remove the protective cover from the tip.
4.Make sure the tip is securely installed.
5.Slide the ON/OFF switch to the “I” for lower power (450°C) setting or “II” for higher power (510°C)
6.Hold the soldering iron like a pen. Press and hold the round buttonon top of the On/Off slide switch continuously. The iron heats up to solder melting point in about 15 seconds.
7.To extend battery life, only press the button when soldering.
8.Place the hot soldering iron standing upright so the
tip does not come in contact with surrounding objects.
9.After soldering, slide the switch to the “OFF” positi- on and replace the protective cover.
Maintenance
1.If it takes more than 30 seconds to reach working temperature, install fresh batteries.
2.Use alkaline batteries for best results. Do not mix old and new batteries.
3.Do not change the soldering tip when hot. Use the tip exchanger provided to remove the tip as shown.
4.The soldering tip is iron plated for long life. Do not file the tip as filing will destory the plating.
5.Remove the batteries from the tool when not using for prolonged periods to prevent batteries from lea- king into the tools.
Spare Tips |
|
Cat. No. | Description |
BP10EU | Conical |
BP11EU | Screwdriver |
Weller Consumer Soldering Iron Warranty Cooper Hand Tools warrants this product will be free from defects in material and workmanship for a period of two (2) years from the date of purchase. No warranty is made with respect to products which have been
(a)altered, modified or repaired by anyone other than Cooper Hand Tools;
(b)subject to abuse, improper use, negligence, accor- dance with normal practices or the instructions and specifications of Cooper Hand Tools;
(c)used in conjunction with any product, device, com- ponent or system, that is either defective, the source of a defect, or not reasonably intended to be used in conjunction with this product.
The foregoing limited warranty is exclusive and in lieu of all other warranties, whether expressed, implied or statutory, including, but not limited to, any warranty of merchantability or fitness for any particular purpose.
The obligation of Cooper Hand Tools under this limited warranty is expressly limited to repairing the product,
refunding the purchase price or replacing the product, at the sole and absolute discretion of Cooper Hand Tools, at no charge to Buyer.
The remedies provided for herein shall constitute the sole recourse of Buyer againsts Cooper Hand Tools, wheter the claim is made in tort or in contract, inclu- ding claims based on warranty, negligence, strict lia- bility, deceit, fraud, misrepresentation or otherwise. In no event shall Cooper Hand Tools be liable for special, indircet, incidental or consequential damages (regar- less of the form of action), nor for lost profits. Cooper Hand Tools liability for any claims or damages arising out of or connected with the manufacture, sale, deli- very, use, maintenance, repair or modification of this product shakk not exceed its purchase price.
Cooper Hand Tools will, during the warranty period, repair, replace or refund the purchase price of any product found to be defective in accordance with this limited warranty.Return freight prepaid with proof of purchase to:
Cooper Tools B.V.
Phileas Foggstraat 16
7821 AK Emmen Drenthe
The Netherlands
Phone: (0591) 66 75 00
Fax: (0591) 66 75 95
