MSRU180W
CMSRU180W
Congratulations. You have purchased a Regent
70 feet
How it works
Add the motion sensor to your existing unit quickly and easily. The light senses heat images from objects such as people, large animals, and automo- bile engines. When motion is detected, the light will automatically turn on. Once motion has stopped, the
light will turn off after a preselected time delay. Your
motion activated light may also be used as a standard floodlight or lantern if the existing light you are adding the sensor and adapter to is
wired to a switch.
What you need
• Phillips head screwdriver
What’s included
• Motion sensor with mounting piece (A) | A |
•Adapter with coiled cord connector (B)
•(2) Mounting screws (C)
Applications | C |
B
Twin
Floodlight
Lantern | Single Floodlight |
What to know
•UL LISTED for wet locations .
•This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. Under Part 15 of the FCC Rules, any changes or modifications to the motion detector described in this instruction sheet that are not expressly approved by Cooper Lighting could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
2
