Mode of | Set slide switch | How to set |
operation: | on sensor to: | power switch: |
|
|
|
TEST Setting |
|
| |
Lights should turn on with | TEST | Keep the power to the | |
motion both day and night. | |||
| fixture on. | ||
Lights should turn off after |
| ||
|
| ||
4 seconds. |
|
| |
|
|
| |
Return to AUTO Setting | AUTO 4 | Turn the power OFF for | |
(motion activated) | |||
or | at least 90 seconds, then | ||
From any of the above | AUTO 12 | back ON. | |
settings. |
| ||
|
|
What to do if...
OUTDOOR LIGHTS DO NOT COME ON WITH MOTION AT NIGHT
Is there power to the fixture?
•Check to see that the circuit breaker has not been tripped.
•Be sure the wall switch is in the ON position.
•Be sure that the bulbs are not burned out or broken.
Is the surrounding external ambient light too bright? (If so the unit may think it’s daytime.)
•
•Relocate or reposition the unit away from the light.
Is the cord plugged onto the sensor head?
•Be sure the adapter cord is correctly plugged into the slot on the bottom of the motion sensor
mounting plate.
TURN OFF POWER BEFORE CONTINUING. Is the wiring to the fixture loose?
•Check wiring, and reconnect if necessary using wire nuts provided.
OUTDOOR LIGHTS COME ON FOR NO APPARENT REASON AT NIGHT
Is there motion in the detection zone?
• Make sure the sensor is not picking up moving objects such as trees, traffic, etc.
TEST FOR YOURSELF
•Cover the sensor lens with cardboard to prevent sensor from detecting motion. If the lights stay off, something in the detection zone is
triggering the sensor.
•If this is the case, reduce the sensitivity.
•Reposition motion sensor.
*If the lights stay on with sensor lens covered, contact customer service.
LIGHTS STAY ON AT NIGHT AND DO NOT TURN OFF
Is there motion in the detection zone?
•Make sure the sensor is not picking up moving objects such as trees, traffic, etc.
•If this is the case, reduce the sensitivity.
•Reposition motion sensor.
If there is no motion, then the unit may be in the override mode.
•Turn the light switch to the OFF position for
90 seconds, and then back to the ON position. This will send the unit back into the AUTO mode. *If the lights continue to stay on, contact customer service.
(continued)
5